• 如何正确测量?

    1.iPhone手机开启系统蓝牙和APP的蓝牙权限,Android手机开启系统蓝牙、GPS、定位权限;
    2.将体脂秤放置在坚硬、平坦的地板上,请勿放置在地毯上。
    3.请赤脚覆盖电极片上秤,确保双脚皮肤与秤上的四个金属电极良好接触;
    4.待体重数字稳定后会开始测试身体成份,当体重圆盘的进度条停止时表示测试结束,此时可以通过报告查看各项数据。
    注意:本品提供的身体成分信息仅作参考,不作为医疗意见
  • 使用体脂秤有哪些注意事项呢?

    1.哪些情况下可能导致体脂测量不准呢?
    发烧中、大量饮酒后、剧烈运动后、大量饮水后、暴饮暴食后、沐浴或桑拿后;
    2.哪些人群尽量避免测量呢?
    体内装有心脏起搏器、人工透析、其他移植医疗设备、浮肿状态;
    3.孕妇是否可以测量呢?
    孕妇请在孕妇模式下进行测量,孕妇模式下电流不会通过身体,保障了孕妇的安全。
    注意:体脂秤采用的是BIA生物电阻抗法,站到体脂秤上会有微弱交流电通过身体,由于孕妇对内外部环境要求较高,因此建议孕妇使用孕妇模式,孕妇模式会保障孕妇的安全。
  • 如何设定体脂秤的称重单位?

    首先请查看体脂秤说明书确认体脂秤是否支持使用APP修改秤的单位。
    1.APP可修改体脂秤的单位
    首先将体脂秤与APP连接,连接成功后点击[我的-单位],在页面内选择您要切换的单位,单位设置完毕后,上称称重才可以完成单位设置。
    2. 仅支持体脂秤端修改单位
    请查看说明书,按照说明书的指示在体脂秤端的正确位置进行单位设置
  • How to measure correctly?

    1. For iPhone, enable system Bluetooth and app Bluetooth permissions; for Android, enable system Bluetooth, GPS, and location permissions;
    2. Place the body fat scale on a hard, flat surface. Do not place it on a carpet.
    3. Stand barefoot on the scale, making sure your feet fully cover the electrode plates and have good contact with the four metal electrodes;
    4. Wait for the weight numbers to stabilize before the body composition test begins. When the progress bar on the weight dial stops, the test is complete. At this point, you can view the data in the report.
    Note: The body composition information provided by this product is for reference only and should not be considered medical advice.
  • What precautions should be taken when using the body fat scale?

    1. In which cases might body fat measurements be inaccurate?
    When you have a fever, after excessive alcohol consumption, after intense exercise, after drinking a large amount of water, after overeating, after bathing or sauna;
    2. Which groups of people should avoid measurement?
    People with implanted cardiac pacemakers, undergoing dialysis, with other medical implants, or in a swollen state;
    3. Can pregnant women measure their body fat?
    Pregnant women should measure in pregnancy mode, where no current passes through the body, ensuring the safety of the pregnant woman.
    Note: The body fat scale uses BIA (Bioelectrical Impedance Analysis). A weak alternating current passes through the body when you stand on the scale. Since pregnant women have higher safety requirements, it is recommended to use the pregnancy mode, which ensures the safety of pregnant women.
  • How to set the weighing unit of the body fat scale?

    First, check the user manual to confirm whether the body fat scale supports unit changes through the app.
    1. The app can change the unit of the body fat scale
    First, connect the body fat scale with the app. Once connected, click [Me - Unit], and select the unit you want to switch to on the page. The unit setting will take effect after you weigh yourself.
    2. Unit changes are only supported on the body fat scale itself
    Please refer to the user manual for instructions on how to set the unit on the body fat scale.
  • Google Fit and Samsung Health Synchronise Instruction

    Google Fit
    Authorization Steps on the Vitafit App
    1. On the page of My Account, click "Health Connect " .
    2. Please Install Heath Connect if the device system below Android 14, and then start autorize.
       If the system is Android 14 and above, please skip the install step, just direclty click" Authorize Immediately" .
    3.click all allow button, then the authroization is sucessful .
       

    Connect steps on Google Fit
    1. Open the Google Fit, and click "Get started" .
    2. Click "Set up" .
    3. Click "Done" to finish connected .
    4. After successfully connected, your measurement data will sync with Google Fit automatically.


    Sumsung Health
    1.  Firstly, please make same steps of authorization on the Vitafit app as above Google Fit mentioned.
    2. After Vitafit app connected with Health Connect, please start Settings on Samsung Health as follow steps.
    1.1. Open the Samsung Health, click "Settings"
    1.2. Click "Health Connet"
    1.3. Click "App permissions"

    1.4. Click "Vitafit" to allow access
    1.5. Click "Allow all" button to finish connecting
    1.6.  After successfully connected, your measurement data will sync with Samsung Health automatically


     
  • Quick Guide

    QUICK START GUIDE FOR ANDROID
    1. Search" Vitafit" via GooglePlay Store.
    2.Convenient login by Googleor Facebook account.
    3.Choose suitable Mode. NoteWeight Only Mode specializedfor pregnant or having apacemaker, etc.

    4.Turn on Bluetooth and Locatioron your phone. OR ELSE THE APPDON'T GET RESULTS ACCORDINGTO ANDROID REGULATIONS.
    5 .Pairing with Vitafit Scale
    6. Turn on Vitafit App and step on for measuring.
    7.Measurement data.
    8. Set up for sync withGoogle Fit.


    9.View measurement datain Google Fit after sync.




service@51vitafit.com